BitLocker installation

-

BitLocker isn’t just a feature for Windows desktop, laptop, and tablet computers. It’s also available for Windows Server as an installable feature. It is a great way to protect servers if you deal with remote locations or hard-to-secure server closets, or if you just want to protect the drives of racked servers.

In this blog, we will see the Bitlocker Installation process

At first install Bitlocker features, if not install





Then Create a GPO and enable the policy









 



Now open the control panel and ensure that view by option should be “Large Icons” then follow the showing step











 

You must have share “Local Resource” to save the file







Now restart the machine


Here is the Bitlocker features are ready to protect your machine

 

Comments

  1. Ahm IT BanglaSeptember 2, 2021 at 11:03 PM

    I am really grateful to you . I have learnt a lot of things from your Blogspot.

    ReplyDelete

Post a Comment

Popular posts from this blog

Static Routing Protocol Configuration

-
Image
  Router 1configuration Router> Router>enable Router#configure terminal Router(config)#int g0/0 Router(config-if)#ip add 10.0.0.1 255.255.255.0 Router(config-if)#no sh Router(config-if)#ex Router(config)# Router(config)#int g0/1 Router(config-if)#no sh Router(config-if)#ip add 172.0.0.1 255.255.255.252 Router(config-if)#ex Router(config)# Router(config)#ip route 192.168.0.0 255.255.255.0 172.0.0.2   Router 0 configuration Router>enable Router#configure terminal Router(config)#int g0/0 Router(config-if)#no sh Router(config-if)#ip address 172.0.0.2 255.255.255.252 Router(config-if)#ex Router(config)# Router(config)# Router(config)#int g0/1 Router(config-if)#no sh Router(config-if)#ip add 192.168.0.1 255.255.255.0 Router(config-if)#ex Router(config)# Router(config)# Router(config)#ip route 10.0.0.0 255.255.255.0 172.0...
Read more

Backup & Restore process of CISCO Router

-
Image
Backup & Restore process of CISCO Router At first take, a look at Backup process: Router>en Router#conf t Router(config)# Router(config)#int g0/0 Router(config-if)# Router(config-if)#ip add 1.1.1.1 255.0.0.0 Router(config-if)#no sh Router(config-if)# Router(config-if)#ex Router(config)#ex Router#ping 1.1.1 .2   Put the IP address of the TFTP-Server Backup configuration on the Router0: Router(config)# Router(config)#Hostname Dhaka Dhaka(config)#int lo 1 Dhaka(config-if)#ip add 5.5.5.5 255.0.0.0 Dhaka(config-if)#ex Dhaka(config)#int lo 3 Dhaka(config-if)#ip add 6.6.6.6 255.0.0.0 Dhaka(config-if)#ex Dhaka(config)#exit Dhaka#copy running-config startup-config Destination filename [startup-config]? Building configuration... [OK   Backup Configuration for running-config: ...
Read more