DHCP Server Configuration in GNS3

-

 

In R1 we gone create DHCP-server for two different network. Let’s starts

R1 Configuration



R1#conf

R1(config)#hostname DHCP-Server

DHCP-Server(config)#int f0/0

DHCP-Server(config-if)#no sh

DHCP-Server(config-if)#ip add 172.16.32.1 255.255.254.0

DHCP-Server(config-if)#ex

DHCP-Server(config)#int f0/1

DHCP-Server(config-if)#no sh

DHCP-Server(config-if)#

DHCP-Server(config-if)#ip add 192.168.10.1 255.255.255.0

DHCP-Server(config-if)#ex

Create two different POOL for 192.168.10.0 and 172.16.32.0 network

For network 192.168.10.0



For network 172.16.32.0



Now we are done with our configuration …now just put command ip dhcp in all pc for automatic IP address.

 

PC 1



PC2



PC3



PC4




Comments

Post a Comment

Popular posts from this blog

Static Routing Protocol Configuration

-
Image
  Router 1configuration Router> Router>enable Router#configure terminal Router(config)#int g0/0 Router(config-if)#ip add 10.0.0.1 255.255.255.0 Router(config-if)#no sh Router(config-if)#ex Router(config)# Router(config)#int g0/1 Router(config-if)#no sh Router(config-if)#ip add 172.0.0.1 255.255.255.252 Router(config-if)#ex Router(config)# Router(config)#ip route 192.168.0.0 255.255.255.0 172.0.0.2   Router 0 configuration Router>enable Router#configure terminal Router(config)#int g0/0 Router(config-if)#no sh Router(config-if)#ip address 172.0.0.2 255.255.255.252 Router(config-if)#ex Router(config)# Router(config)# Router(config)#int g0/1 Router(config-if)#no sh Router(config-if)#ip add 192.168.0.1 255.255.255.0 Router(config-if)#ex Router(config)# Router(config)# Router(config)#ip route 10.0.0.0 255.255.255.0 172.0...
Read more

BitLocker installation

-
Image
BitLocker isn’t just a feature for Windows desktop, laptop, and tablet computers. It’s also available for Windows Server as an installable feature. It is a great way to protect servers if you deal with remote locations or hard-to-secure server closets, or if you just want to protect the drives of racked servers. In this blog, we will see the Bitlocker Installation process At first install Bitlocker features, if not install Then Create a GPO and enable the policy   Now open the control panel and ensure that view by option should be “Large Icons” then follow the showing step   You must have share “Local Resource” to save the file Now restart the machine Here...
Read more

Backup & Restore process of CISCO Router

-
Image
Backup & Restore process of CISCO Router At first take, a look at Backup process: Router>en Router#conf t Router(config)# Router(config)#int g0/0 Router(config-if)# Router(config-if)#ip add 1.1.1.1 255.0.0.0 Router(config-if)#no sh Router(config-if)# Router(config-if)#ex Router(config)#ex Router#ping 1.1.1 .2   Put the IP address of the TFTP-Server Backup configuration on the Router0: Router(config)# Router(config)#Hostname Dhaka Dhaka(config)#int lo 1 Dhaka(config-if)#ip add 5.5.5.5 255.0.0.0 Dhaka(config-if)#ex Dhaka(config)#int lo 3 Dhaka(config-if)#ip add 6.6.6.6 255.0.0.0 Dhaka(config-if)#ex Dhaka(config)#exit Dhaka#copy running-config startup-config Destination filename [startup-config]? Building configuration... [OK   Backup Configuration for running-config: ...
Read more